Recent Application of Bio-Alcohol: Bio-Jet Fuel

Recently, the biomass-based energy production has been actively studied as a research and development area for reducing carbon emissions as a solution to global warming caused by the increase of carbon dioxide emissions. Especially, as the energy consumption in the air transportation field increases, the carbon dioxide emissions increase simultaneously. Therefore, the bio-jet fuel production technology is being actively developed to solve this problem. The bio-jet fuel manufacturing process is a process of manufacturing biomass-derived jet fuel that can replace the existing petroleum-based jet fuel. It includes an alcohol-to-jet (ATJ) process using bio-alcohol such as bio-butanol and bio-ethanol, oil-to-jet (OTJ) process using vegetable oil, and an F-T process using syngas obtained from gasification of biomass-based raw materials

Management Trend for Unstable Pelvic Bone Fractures in Regional Trauma Centers: Multi-Institutional Study in the Republic of Korea

Purpose In the Republic of Korea, the use of trauma centers was recently adopted and is expected to have better outcome for severely injured patients. This study aimed to evaluate the clinical outcomes and treatment methods for unstable pelvic bone fractures in trauma centers. Methods The annual number of patients, clinical outcomes, and treatment methods of unstable pelvic bone fractures in three trauma centers from 2016 to 2020 were retrospectively reviewed. The patients were dichotomized into survivors and deceased, and demographic data, treatment, and clinical outcomes were compared. Multivariable analysis was performed to identify the factors associated with survival. Results Among 237 patients, 101 (42.6%) were deceased. Mortality was lower in the later period (2019–2020) compared with the early period (2016–2018; 33.6% vs. 50.0%, p = 0.011). Direct admission of an increasing number of patients to trauma centers reduced prehospital time. Although the use of angioembolization in treating pelvic bone fracture (p < 0.001), and the use of other treatment methods did not change significantly (2016–2020). Lower age, lowest systolic blood pressure in the trauma bay, and higher lactate level, international normalized ratio, the amount of packed red blood cell transfusion at 24 hours were positively associated with mortality in the multivariate analysis. Conclusion Increasingly more patients with unstable pelvic bone fracture were admitted to trauma centers; mortality improved. Angioembolization increased significantly and multi-disciplinary modality for early bleeding control was still essential

Use of amplitude-integrated electroencephalography in decision-making for extracorporeal membrane oxygenation in comatose cardiac arrest patients whose eventual neurologic recovery is uncertain

Comatose cardiac arrest patients frequently experience cardiogenic shock or recurrent arrest. Extracorporeal membrane oxygenation (ECMO) can be used to salvage patients with cardiogenic shock or cardiac arrest refractory to conventional therapies. However, in comatose cardiac arrest patients whose neurologic recovery is uncertain, the use of ECMO is restricted because it requires considerable financial and human resources. Amplitude-integrated electroencephalography is an easily applicable, real-time electroencephalography monitoring tool that has been increasingly used to monitor brain activity in comatose cardiac arrest patients. We describe our experience of using amplitude-integrated electroencephalography in decision-making to place ECMO for comatose cardiac arrest patients whose eventual neurologic recovery appeared uncertain at the time of ECMO placement

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium

Objective: This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration.&nbsp;Methodology: Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination.&nbsp;Results: Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the ca p. Conclusion: The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation

The Correction of a Secondary Bilateral Cleft Lip Nasal Deformity Using Refined Open Rhinoplasty with Reverse-U Incision, V-Y Plasty, and Selective Combination with Composite Grafting: Long-term Results

BackgroundThis article presents long-term outcomes after correcting secondary bilateral cleft lip nasal deformities using a refined reverse-U incision and V-Y plasty or in combination with a composite graft in order to elongate the short columella.MethodsA total of forty-six patients underwent surgery between September 1996 and December 2008. The age of the patients ranged from 3 to 19 years of age. A bilateral reverse-U incision and V-Y plasty were used in 24 patients. A composite graft from the helical root was combined with a bilateral reverse-U incision in the 22 patients who possessed a severely shortened columella. The follow-up period ranged between 2 and 10 years.ResultsA total of 32 patients out of 46 were evaluated postoperatively. The average columella length was significantly improved from an average of 3.7 mm preoperatively to 8.5 mm postoperatively. The average ratio of the columella height to the alar base width was 0.18 preoperatively and 0.29 postoperatively. The postoperative basal and lateral views revealed a better shape of the nostrils and columella. The elongated columella, combined with a composite graft, presented good maintenance of the corrected position with no growth disturbance. A composite graft showed color mismatching in several patients. Twenty-six patients demonstrated no alar-columella web deformity and satisfactory symmetry of the nostrils. Four patients experienced a drooping and overhanging of the corrected alar-columella web.ConclusionsA bilateral reverse-U incision with V-Y plasty or in combination with a composite graft was effective in correcting secondary bilateral cleft lip nasal deformity

Fabrication of Stable Cartilage Framework for Microtia in Incomplete Synchondrosis

The synchondrosis between the sixth and seventh costal cartilage is usually used for the base frame in autogenous ear reconstruction. If the synchondrosis is loose, a variety of modifications can be devised. This report introduces new methods for these problems. In cases of incomplete synchondrosis, only the surface of the base block margin was smoothly tapered without carving for the removal of the conchal deepening. The secure fixation of the two segments (helix and antihelix) to the base block using fine wire sutures gave stability to the unstable basal frame. After confirming that all the segments were assembled in one stable piece, the remaining conchal deepening of the basal framework was removed, and the outer lower portion of the basal cartilage was trimmed along its whole length. A total of 10 consecutive patients with microtia, ranging from 8 to 13 years old, were treated from 2008 to 2009. The follow-up period was 6 months to 2 years. Despite incomplete synchondrosis, the stable frameworks were constructed using the authors' method and aesthetically acceptable results were achieved. The proposed method can provide an easy way to make a stable cartilage framework regardless of the variable conditions of synchondrosis

Is it Possible to Successfully Treat Locally Advanced Colon Cancer Using Pre-Operative Chemoradiotherapy?

Pre-operative chemoradiotherapy (CRT) is a preferable treatment option for patients with locally advanced rectal cancer. However, few data are available regarding pre-operative CRT for locally advanced colon cancer. Here, we describe two cases of successful treatment with pre-operative CRT and establish evidence supporting this treatment option in patients with locally advanced colon cancer. In the first case, a 65-year-old woman was diagnosed with ascending colon cancer with duodenal invasion. In the second case, a 63-year-old man was diagnosed with a colonic-duodenal fistula due to transverse colon cancer invasion. These case reports will help to establish a treatment consensus for pre-operative CRT in patients with locally advanced colon cancer

Epigenetic Changes of Serotonin Transporter in the Patients with Alcohol Dependence: Methylation of an Serotonin Transporter Promoter CpG Island

ObjectiveaaPsychiatric disorders such as depression, anxiety and alcohol dependence are associated with serotonin metabolism. We assessed the methylation level of the serotonin transporter (5-HTT) promoter region in control and alcohol dependent patients. MethodsaaTwenty seven male patients who met the Diagnostic and Statistical Manual of Mental Disorder IV (DSM-IV) criteria for alcohol dependence were compared with fifteen controls. Polymerase chain reaction (PCR) assays of bisulfate-modified DNA were designed to amplify a part of the CpG island in the 5HTT gene. Pyrosequencing was performed and the methylation level at seven CpG island sites was measured. ResultsaaWe found no differences in the methylation patterns of the serotonin transporter linked promoter region (5-HTTLPR) between alcohol-dependent and control subjects. ConclusionaaOur negative finding may be because 5-HTT epigenetic variation may not affect the expression for 5-HTT or there may be other methylation site critical for its expression. To find out more conclusive result, repeating the study in more methylation sites with a larger number of samples in a well-controlled setting is needed. Psychiatry Investig 2011;8:130-13

Effect of pralidoxime on coronary perfusion pressure during cardiopulmonary resuscitation in a pig model

Objective Pralidoxime is widely used for the treatment of organophosphate poisoning. Multiple studies have reported its vasoconstrictive property, which may facilitate the restoration of spontaneous circulation (ROSC) after cardiac arrest by increasing the coronary perfusion pressure (CPP). 2,3-Butanedione monoxime, which belongs to the same oxime family, has been shown to facilitate ROSC by reducing left ventricular ischemic contracture. Because pralidoxime and 2,3-butanedione monoxime have several common mechanisms of action, both drugs may have similar effects on ischemic contracture. Thus, we investigated the effects of pralidoxime administration during cardiopulmonary resuscitation in a pig model with a focus on ischemic contracture and CPP. Methods After 14 minutes of untreated ventricular fibrillation, followed by 8 minutes of basic life support, 16 pigs randomly received either 80 mg/kg of pralidoxime (pralidoxime group) or an equivalent volume of saline (control group) during advanced cardiovascular life support (ACLS). Results Mixed-model analyses of left ventricular wall thickness and chamber area during ACLS revealed no significant group effects or group-time interactions, whereas a mixed-model analysis of the CPP during ACLS revealed a significant group effect (P=0.038) and group-time interaction (P<0.001). Post-hoc analyses revealed significant increases in CPP in the pralidoxime group, starting at 5 minutes after pralidoxime administration. No animal, except one in the pralidoxime group, achieved ROSC; thus, the rate of ROSC did not differ between the two groups. Conclusion In a pig model of cardiac arrest, pralidoxime administered during cardiopulmonary resuscitation did not reduce ischemic contracture; however, it significantly improved CPP

Electricity production by the application of a low voltage DC-DC boost converter to a continuously operating flat-plate microbial fuel cell

An ultra-low voltage customized DC-DC booster circuit was developed using a LTC3108 converter, and used continuously on a flat-plate microbial fuel cell (FPM) system. The boost converter successfully stepped up the microbial fuel cell (MFC) voltage from ~0.5 V to 3.3 and 5.0 V of outputs. The designed circuit and system displayed the dynamic variations of the source FPM as well as the output voltage through the designed three connection points within the booster circuit. The source MFC voltage was interrelated with the booster circuit and its performance, and it adapted to the set points of the booster dynamically. The maximum output power density of the MFC with the DC-DC booster circuit was 8.16 W/m3 compared to the maximum source FPM input power of 14.27 W/m3 at 100 Ω, showing a conversion efficiency of 26–57%, but with a 10-fold higher output than that of the source voltage. The combined LTC3108 with FPM supplied power for electronic devices using synthetic and real domestic wastewater. This report presents a promising strategy for utilizing the electrical energy produced from MFCs, and expands the applicability of bioelectrochemical systems with an improved energy efficiency of the present wastewater treatment system